Spare -
replacement items (these all come with WB-750 kit)
Item# IV-3737
Innovate WB
Bosch Oxygen Sensor
WEB Price
$79
Weight
2
Bosch Oxygen Sensor
Bosch LSU4.2 5-wire, wide-band O2 sensor.
One sensor comes with the LM-1
NO
Warranty
on O2 Sensor
Item# IV-3735
Innovate
Bung and Plug
WEB Price
$8
Weight
3
Steel bung and plug set
One bung/plug comes with the LM-1, LC-1 and
any other kit with a LC-1
Item# IV-3738
Innovate
Sensor cable
WEB Price
$20
Weight
3
10-ft. long, for direct connection of LM-1 to Bosch/VW plug on LSU4.2
One of these cables comes with the LM-1
IV-3740
Innovate
12V power cable
$12
Weight
3
10-ft. long, for direct connection
to lighter plug
No Picture
Item#
IV-3730
Innovate WB 5Volt output
cable
WEB Price
$8
Weight 2
Analog output cable
6-ft. long, mini to stripped-and-tinned, matching LM-1 analog output
specifications. Used to send 0-5 volt output signal to you data logger.
The 0-5 volt output is compatible with 99% of
the data loggers in use today. This unit has been interfaced to RacePak V300
and SC1000 systems as well as the Edelbrock Qwikdata.
Includes an integrated circuit for converting tach or inductive
clamp output to a clean analog signal that can be logged by the LM-1. The
cable can be calibrated to the characteristics of your engine through a
simple setup routine. **Inductive Clamp Not Included**
For use with Aux. Input Cable with RPM Converter cable #2
In cases where it is difficult to get a tach
signal, this pickup will clamp on #1 spark plug like a timing light.
Innovate #3727
Item#
IV-3728
Innovate
Exhaust Clamp
WEB Price
$73
Weight
3
Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate
lambda measurements in non-cat autos or other engines
Innovate #3728
Click to expand --->
Item#
iv-3731
Innovate
Analog Display
WEB Price
$58
Weight
3
52mm, 8-18 AFR needle gauge driven by LM-1 analog output. **Requires "Analog
Output Cable" Not included**
Item# IV-3729
HBX-1
Heat-sinking Bung Extender
WEB Price
$89
Weight
2
The
HBX-1 is intended to provide a degree of thermal isolation in applications
where the pipe temperature exceeds 900 º F (approx. 500º C) with a
heat-sinking design intended to screw into a new or existing 18mm bung.
Item#
IV-3754
MTS
Carrying Case
WEB Price
$55
4
Lbs
The MTS (Modular Tuning System) carrying case is a durable plastic
case, designed to hold the LM-1 and all accessories included in any
configuration of the MTS kits.
To
better interface with Autronics’ ECUs, we’ve developed a custom interface
cable. This is essentially a modified analog output cable that includes some
active circuitry to precisely match the input expectations of the ECU.
