Includes an integrated circuit for converting tach or inductive
clamp output to a clean analog signal that can be logged by the LM-1. The
cable can be calibrated to the characteristics of your engine through a
simple setup routine. **Inductive Clamp Not Included**
For use with Aux. Input Cable with RPM Converter cable #2
In cases where it is difficult to get a tach
signal, this pickup will clamp on #1 spark plug like a timing light.
Innovate #3727
Item#
IV-3728
Innovate
Exhaust Clamp
WEB Price
$75
Weight
3
Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate
lambda measurements in non-cat autos or other engines
Innovate #3728
Click to expand --->
Item#
IV-3731
Innovate
Analog Display
WEB Price
$58
Weight
3
52mm, 8-18 AFR needle gauge driven by LM-1 analog output. **Requires "Analog
Output Cable" Not included**
Innovate #3731
Item#
IV-3729
HBX-1
Heat-sinking Bung Extender
WEB Price
$89
Weight
2
The
HBX-1 is intended to provide a degree of thermal isolation in applications
where the pipe temperature exceeds 900 º F (approx. 500º C) with a
heat-sinking design intended to screw into a new or existing 18mm bung.
Innovate #3729
Item#
IV-3754
MTS
Carrying Case
WEB Price
$55
4
Lbs
The MTS (Modular Tuning System) carrying case is a durable plastic
case, designed to hold the LM-1 and all accessories included in any
configuration of the MTS kits.
To
better interface with Autronics’ ECUs, we’ve developed a custom interface
cable. This is essentially a modified analog output cable that includes some
active circuitry to precisely match the input expectations of the ECU.
The
Innovate BP-1 Battery Pack allows you to test & log without the hassle of
hooking the unit up to a 12-volt source. The BP-1 is a foam lined heavy duty
plastic carrying case with a built-in 12-volt rechargeable battery &
charger. The BP-1 battery allows you to log to an LM-1 (not included) for up
to an hour between charges. The BP-1 works great on Sprint Cars, Midgets,
Quarter Midgets, Go Karts, Motorcycles, or any application where no battery
exists or is difficult to locate.
Innovate #3771
Item#
WB-789
16 Volt to 12 step down
resistor
WEB Price
$59
2
Lbs
Required with the LM-1 on 16 volt systems. Dimensions: 5" x 3" x 1
1/2" thick.
