This Hall sensor has been
custom configured to be a plug-and-play installation with the DL-32 or
the Aux Box.
5/16-24 SS
threaded body. Required for Jerico, Lenco, Strange Ultra case, etc for clutch RPM. Also
works well on motorcycle and other tight clearance applications.
Requires magnets oriented SOUTH. It has an imbedded pull-up resistor.
Requires magnets on rotating component
Includes setup instruction for DL-32 & AuxBox
S-363 in a
Strange Ultra case - click to expand
S-365
Speed Sensor
WEB Price
$15
Weight 1
This Hall sensor has been
custom configured to be a plug-and-play installation with the DL-32 or
the Aux Box.
Requires magnets
oriented SOUTH. It has an imbedded pull-up resistor.
Has mounting ears for bolt on installation
Requires magnets on rotating component
Includes setup instruction for DL-32 & AuxBox
S-361
Speed Sensor
WEB Price
$18
Weight 1
2 wire reed switch - plastic body 5/16
fine thread . This
is the speed/shaft sensor supplied in Racepak V300 and earlier (not
V300SD or Sportsman), Edelbrock Qwikdata and others (without their
connector) Requires magnets on rotating component.
Racepak part number 800-SS-PRO-5
Edelbrock part number 91116
S-364
Speed Sensor Mount Kit
WEB Price
$12
Weight 1
Depth adjustable T bolt.
Includes 2 4-40 screws and nuts. All stainless.
S-366
Speed Sensor Magnets
WEB Price
$3
Weight 1
Two 1/4" x 1/4" magnets with
South Pole identified for use with S-365 Sensor
S-367
L bracket
WEB Price
$11
Weight 1
Universal L bracket to mount
speed sensor
7/16" hole on short side 5/16" x 3/4" slot on long side
S-368
Bonded sensor &
stud
WEB Price
$23
Weight 1
Hall sensor
bonded to 5/16" stud. With nuts & washers.
Requires magnets oriented SOUTH. It has
an imbedded pull-up resistor.
This is the part included in
S-37x-K kits
Includes setup instruction for DL-32 & AuxBox
Holley Kit
S-37x-H
Holley Shaft
Speed Kit
WEB Price
$129
Weight 1
Hall effect sensor, bracket, collar, L bracket, 8' shielded cable and
instruction sheet
XFI - FAST
Kit
S-37x-FR
XFI Shaft
Speed Kit
WEB Price
$105
Weight 1
2
wire plastic reed sensor, bracket, collar, L bracket, 10' shielded cable and
instruction sheet
S-37x-FH
XFI Shaft
Speed Kit
WEB Price
$137
Weight 1
3
wire stainless steel hall effect sensor, bracket, collar, L bracket, 10' shielded cable and
instruction sheet
Split Collars
S-37x
Split Collar - 4 Magnets
WEB Price
$52
Weight 1
When ordering choose from the following
sizes:
1.250" Click here for sizing info
1.375"
1.812" Popular Strange Engineering size
1.875" Popular Mark Williams size
2.00"
2.125" Popular Strange Engineering size
2.187" Popular Mark Williams size
2.250"
2.375"
Yes you can remove any number of magnets.
And yes, it's common on 12 bolts, Dana's and 9" Fords with stock yokes
to open up the hole to some unusual size/shape. It's not a
crankshaft - if you keep it within .050 of straight/round, your sensor
will see the magnet.
Magnets are oriented South side out
(required to work on Racepak, MSI and most other hall effect sensors)
